I had to install this remote access card into one of my clients servers. The documentation was pretty straight forward, boot off install CD and run IPMICFG.exe to configure, except when you boot of the CD and it’s doesn’t recognize your CD drive. Called support, no help, the guy thought I was an idiot, and I hung up on him. If i booted the iso image in a VM, IPMICFG.exe ran fine, so I was in a little bit of a pickle. My solution was to make a bootable DOS USB drive and put IPMICFG.exe on it. Booted off the USB drive, and was able to configure the card with no problem.